Skip to content
Northwoods Metalworks

Services

On-Site Installation & Repair

Most of our work is built in the shop, and some of it is finished at your place. We install what we build, install parts you already own, and make noncritical repairs where the piece sits, as long as you have a working welder and power on site.

Custom fabrication in the shop or on site, by appointment.

A rack, mount or bench that has to be fitted where it will live

Some pieces only prove themselves once they are in place. A tool rack meant for a trailer wall, a bench that has to sit level on an uneven garage floor, or a mount that lines up with holes already drilled in a frame all depend on the real surface, not a drawing of it.

When we build the piece, we can also install it. Fit is checked against the actual surface, and the fasteners and hardware are planned into the estimate, so you are not left holding a finished part and a pile of questions about how it attaches.

A store-bought item that needs to be installed properly

Plenty of people buy a rack, a mount or a bracket and then find the instructions assume a different vehicle, a different wall or a different frame. We can install metal items and hardware you supplied, even though we did not build them.

Before agreeing, we look at what the item attaches to and tell you honestly whether it is a sensible install. If the surface is too thin, too worn or the wrong shape for the item, we say so up front, and the work we agree to is limited to the installation itself.

A job that needs a look at the site before anything is built

A bad measurement is expensive, because the piece gets built and then does not fit. For some jobs, the better first step is a site visit to measure, make a template and test-fit before any steel is cut. Photos with a tape measure in frame can replace a visit sometimes, and we tell you when they will do.

The same trip covers repair work. When a noncritical part cannot come to the shop, we can weld or repair it where it sits, for example a bracket on a shed door track or a mount on a stand.

This is the one firm requirement: the site needs a working welder plus a source of power. We arrive with experience and hand tools, not a welding rig or generator.

Typical On-Site Work

  • Tool racks and mounts installed on a work trailer or truck
  • Workbenches, shelving and storage racks bolted down in a garage or shop
  • A customer-supplied rack or mount installed on a vehicle or trailer
  • Test-fit and install of a part we built to a measured template
  • A noncritical bracket or mount repaired in place with your welder and power

What to Send Us

  • Photos of the location and the surface or equipment the piece will attach to
  • Rough measurements and any obstructions
  • What is being installed and whether we built it, you bought it, or it still has to be designed
  • Whether a working welder and a power source are on hand at the site, if welding is involved
  • Your town, so we can tell you whether it is inside our service area

What We Don't Take On

On-site work has the same limits as shop work, plus one more: it needs your equipment for any welding. The following are outside what we do:

  • On-site welding at a place that has no working welder or power source. A welding rig or generator is not part of what we offer
  • Structural, load-rated, road-critical and safety-critical work, in the shop or on site
  • Jobs where an engineer would have to approve the design first
  • Severely damaged or corroded structural metal
  • Work that needs travel beyond our service area

How We Schedule Work

Work is scheduled by appointment. Urgent repairs are taken when the schedule allows, so call or text to check.

Questions

Do you bring your own welder?

No. We don't run a welding rig or generator. Any welding or repair on site relies on a working welder and a power source that you provide. We bring experience and hand tools.

Where do you do on-site work?

In the same area we serve from the shop, Iosco County and the surrounding area described on the Service Area page. Whether we travel to a given address depends on the distance and the job.

Can you install something I bought myself?

Often, yes. Send photos of the item and of where it will go, and we will tell you whether the install makes sense and what it involves before we agree to the work.

Do you take urgent repairs?

Sometimes. Work is scheduled by appointment, but we take urgent repairs when the schedule allows. Call or text to check, and send photos of the problem so we can tell you whether it is a job we can do on site.

What repairs will you not do on site?

Anything structural, load-rated, road-critical or safety-critical, and anything an engineer would have to approve. Those limits apply in the shop and at your site.

By Appointment

Have a Project in Mind?

Describe the problem, send photos and approximate dimensions, and we'll let you know if it's a fit.