Skip to content
Northwoods Metalworks

Services

Welding & Repair

Repair is selective, in the shop or on site. We take on suitable, noncritical parts, and tell you up front when a job isn't for us.

Custom fabrication in the shop or on site, by appointment.

A cracked bracket or frame needs a clear look before it is welded

A bracket that cracked, a frame that bent at a weld, or a mount that has worked loose are common reasons people ask about a repair. A weld is only as good as the metal around it and the load the part carries, so the first step is working out how the part failed. A crack can also point to overload or wear somewhere else on the part, so we look at the surrounding metal before deciding on the repair.

We look at the part in the shop or at your site, ask how it was used, and check whether a repair is a fit for the job. If the crack runs through a load path, or the part is one that should not fail, we will tell you so rather than weld it and hope.

Worn or broken parts are sometimes worth rebuilding

Some worn or broken parts can be rebuilt in the shop instead of replaced. Restoring a selected equipment component, adding reinforcement, or adapting a part to a new use can be a practical route when the original is hard to find.

Rebuilding only makes sense when the base metal is sound and the finished part will do its job. We check that before we agree to the work, and we explain what the repair will and will not achieve so the decision is yours, made with the facts in front of you.

A repair that would leave a weak part in service

Noncritical broken brackets are often better replaced than repaired. When a repair would leave the part weaker than it should be, or the metal around the break is too damaged to trust, we will say so and suggest a replacement bracket built in the shop.

Replacement is also the cleaner route when the old part is only a pattern for a new one. We talk through the options, the fit and the work involved, and we would rather tell you early that a repair is not the right call than take a job that will not hold.

What We Don't Take On

Some repair work is outside what we take on, and we would rather say so before any metal is cut. The following are outside what we do:

  • On-site welding when there is no working welder and power at your location. We don't bring a welding rig
  • Severely damaged or corroded structural metal
  • Structural, road-critical and safety-critical work
  • Repairs that need engineering sign-off before they can be done safely

Example Builds

  • Broken brackets and mounts on work equipment, replaced or repaired in the shop or on site
  • Cracked covers, guards and housings that can be welded cleanly, in the shop or at your place with your welder
  • Minor fabrication alterations to an existing part, such as a new hole pattern or an added tab
  • Reinforcement or adaptation of a suitable part, reviewed before work starts
  • Restoration of selected equipment components, such as worn mounts and stands
  • Rebuilding a worn cart, stand or rack frame in the shop

What to Send Us

  • Photos of the break or damage from several angles
  • The part's job, and what it attaches to
  • How the part failed, if you know
  • The make, model and size of the equipment or part
  • Whether the part can come to the shop, or has to be repaired where it sits
  • If it has to be done on site: whether you have a working welder and power at that location

How We Schedule Work

Work is scheduled by appointment. Urgent repairs are taken when the schedule allows, so call or text to check.

Questions

What repairs do you take on?

Suitable, noncritical parts, either in the shop or on site, such as broken brackets, worn mounts, minor alterations and reinforcement. If a part is critical or too damaged to trust, we will say so before any work starts.

Do you come to my site to make a repair?

Yes, when you have a working welder and power at your location. We don't bring a welding rig or generator, so the repair uses your equipment and we bring the experience and hand tools. Noncritical parts only, and travel depends on distance and the job. See On-Site Installation & Repair for details.

How does a repair quote start?

Send photos of the break from several angles, what the part does, and what it attaches to. We reply with whether the repair is a fit, what it would involve, and whether a replacement makes more sense. Work is scheduled by appointment.

Can you repair a part someone else has already welded?

Sometimes. A previous repair can hide the original damage, so we look at the part closely first and tell you whether another repair is sound or whether a replacement makes more sense.

What happens if a repair is declined?

We tell you why. When we can, we suggest another route, such as a replacement part built in the shop, so you have a practical next step.

By Appointment

Have a Project in Mind?

Describe the problem, send photos and approximate dimensions, and we'll let you know if it's a fit.