Skip to content
Northwoods Metalworks

Services

Shop Fabrication

Workbenches, tables, storage and fixtures for the workspace you already have.

Custom fabrication in the shop or on site, by appointment.

The workbench is too small for the work on it

Most home and small shops are built around whatever space was free. The bench ends up as a sheet of plywood on two sawhorses, or a table that rocks every time you hammer on it. Parts sit on the floor, tools get stacked on the vise, and the next project starts with clearing a spot first.

A workbench is a tool, and it should be sized and built for the way you work. We start with the work you do at the bench, how tall you stand, what gets clamped and where, and how much weight it has to carry. The photo below shows Dennis at his own steel bench in his shop. A solid bench that suits the job saves time on every project after it.

Storage that doesn't match the tools or the room

Shelves added one at a time rarely line up with what you actually keep. Stock ends up on the floor, drawers hold the wrong sizes, and the one thing you need is always at the back. Each new project adds more clutter, and the space gets harder to use.

We design storage around what you keep and how often you reach for it. That can mean racks for bar stock, sheet goods and fittings, bins sized to the drawers you have, and fixtures that hold a part while you work on it. We measure the room first and plan the layout so the walkways stay clear.

A makeshift setup can make the work less safe

A grinder on a wobbly stand, cords stretched across the floor, and sharp scrap piled by the door are the kinds of setups that cause trouble. A workspace that grew by accident often has poor access and no clear place for the things that need to stay apart.

We build fixtures and storage with clean edges, solid mounting and clear access, and we keep the layout simple enough to use every day. We also build noncritical guards and covers for workshop equipment. When a setup involves pressure, fuel or fire, we tell you up front that it is outside what we build, because those systems need specialist design.

Example Builds

  • Workbenches and welding tables sized to the work at hand
  • Rolling shop carts for tools, parts and welding gear
  • Storage racks for bar stock, sheet goods and fittings
  • Drawer and bin systems fitted to the cabinet or wall space you have
  • Fixtures and jigs that hold a part steady while you work on it
  • Tool stands and holders for grinders, drills and hand tools
Dennis Kobel fitting steel rod at a workbench.
Dennis fitting rod at a steel bench.
Illustration of a rack holding metal panels.
Illustrative photo

What to Send Us

  • Pictures of the space you want to set up, taken from the doorway and from two corners
  • The work you do at the bench, and the tools you reach for most often
  • The size of the room or wall space, with doors and windows marked
  • A list of what needs to be stored, with rough sizes and weights
  • Whether a bench, cart or rack needs to move, and how often

What We Don't Take On

Some shop work sits outside what we build. We don't build pressure systems, propane lines or other fuel systems, and we don't build fire-related systems of any kind. We also don't do customer electrical work, including wiring, outlets and power feeds for a shop or a machine. Those systems need specialist design and approvals before anyone works on them, so that work sits outside what we offer. We are glad to build the bench, rack or fixture that sits beside them.

Questions

What can you build for a shop that already exists?

Benches, tables, racks, storage, carts and fixtures that fit the space you have. We measure the room and the work first, so the new pieces fit the shop rather than the other way around.

Do you build rolling shop carts?

Yes. Carts for tools, parts and welding gear that stay in the workspace are built here. Gear that goes out to a job site, such as jobsite carts and equipment mounts, is covered on the Contractor & Small-Business Fabrication page.

Can a new bench or cabinet match what I already have?

Often. Send photos of the existing bench or storage with the dimensions you can get. We will tell you whether a new piece should match it or whether the layout should change.

How do we start a shop project?

Send photos of the space, a list of the work you do and what needs to be stored, plus rough dimensions. Projects are booked by appointment, so get in touch and we will set a time to talk.

Will you do work on the building or its power supply?

No. Customer electrical work and pressure, propane and fire-related systems are outside what we take on. We will build the bench, rack or fixture that goes beside them.

By Appointment

Have a Project in Mind?

Describe the problem, send photos and approximate dimensions, and we'll let you know if it's a fit.